Gummy Bear Recipe
This gummy bear recipe makes shelf-stable gummy bears that taste just like the real thing! Switch up the flavors and colors and make them unique
Servings: 105 gummy bears
Calories: 173kcal
Equipment
- Food Scale
- Gummy Bear Molds
Ingredients
- 225 grams juice or water
- 50 grams KNOX gelatin about 6 packets
- 160 grams sugar
- 60 grams water
- 200 grams corn syrup glucose, honey or golden syrup can be subbed
- 10 grams citric acid leave out if you're using alcohol
- ¼ teaspoon candy flavoring I used raspberry, strawberry and tropical punch
Instructions
- Combine gelatin, and juice (or water) in a heatproof container. Stir gently to combine. Let sit for 5 minutes to give your gelatin time to bloom.
- Combine the sugar and the water in a large saucepan and bring to a boil. Once the steam begins to disappear and the mixture begins to look thick and bubbly (around 240ºF) turn off the heat.
- Add in the gelatin mixture in chunks, the corn syrup, citric acid and the candy flavoring.
- Mix until everything is melted.
- Let the mixture sit for 10 minutes and allow the mixture to clear and foam to collect at the top. After 10 minutes the foam should be able to be easily scooped off the surface with a spoon.
- Transfer the mixture to a squeeze bottle and pipe into molds.
- Let your gummy bears chill in the fridge for 6 hours until the bears are set but 24 hours is best. Once they are set they can be stored at room temperature.
Video
Notes
If your gummy mixture gets too thick, you can reheat it in 10-second increments to get it fluid again.
### **Original gummy bear recipe with sorbitol Formula**
* 8 ounces granulated sugar
* 3 tablespoons sorbitol
* 8 ounces corn syrup (glucose, honey, or golden syrup can be substituted)
* 6 ounces cool water (fruit juice, wine, or vodka can be substituted)
* 44 grams KNOX gelatin (about 6 packets)
* 2 teaspoons citric acid (leave out if using alcohol)
* 1 ½ teaspoons candy flavoring (raspberry, strawberry, tropical punch, etc.) **Instructions** 1. Combine the gelatin and water (or flavored liquid) in a heatproof container. Stir gently to combine. Let sit for 5 minutes to allow the gelatin to bloom. 2. In a medium saucepan, combine the corn syrup, sugar, and sorbitol. Stir gently to combine, then bring to a simmer over medium–high heat. 3. Once simmering, wash down the sides of the pan with water using a clean pastry brush to dissolve any stray grains of sugar. 4. Remove the mixture from the heat. Add the citric acid and stir in the bloomed gelatin mixture with a spatula until the gelatin is fully melted. 5. Let the mixture sit for 10 minutes to allow it to clarify and for any foam to rise. After 10 minutes, skim the foam off the surface with a spoon. 6. Strain the liquid and divide it into bowls as needed. Add food coloring and candy flavoring to each portion. (Example: pink, blue, yellow.) 7. Lightly oil your gummy molds and wipe out the excess. Pour the mixture into the prepared molds. 8. Chill the molds in the refrigerator for **6 hours minimum**, or ideally **24 hours** for best texture. Once set, the gummies can be stored at room temperature. --
* 3 tablespoons sorbitol
* 8 ounces corn syrup (glucose, honey, or golden syrup can be substituted)
* 6 ounces cool water (fruit juice, wine, or vodka can be substituted)
* 44 grams KNOX gelatin (about 6 packets)
* 2 teaspoons citric acid (leave out if using alcohol)
* 1 ½ teaspoons candy flavoring (raspberry, strawberry, tropical punch, etc.) **Instructions** 1. Combine the gelatin and water (or flavored liquid) in a heatproof container. Stir gently to combine. Let sit for 5 minutes to allow the gelatin to bloom. 2. In a medium saucepan, combine the corn syrup, sugar, and sorbitol. Stir gently to combine, then bring to a simmer over medium–high heat. 3. Once simmering, wash down the sides of the pan with water using a clean pastry brush to dissolve any stray grains of sugar. 4. Remove the mixture from the heat. Add the citric acid and stir in the bloomed gelatin mixture with a spatula until the gelatin is fully melted. 5. Let the mixture sit for 10 minutes to allow it to clarify and for any foam to rise. After 10 minutes, skim the foam off the surface with a spoon. 6. Strain the liquid and divide it into bowls as needed. Add food coloring and candy flavoring to each portion. (Example: pink, blue, yellow.) 7. Lightly oil your gummy molds and wipe out the excess. Pour the mixture into the prepared molds. 8. Chill the molds in the refrigerator for **6 hours minimum**, or ideally **24 hours** for best texture. Once set, the gummies can be stored at room temperature. --
Nutrition
Serving: 20gummy bears | Calories: 173kcal | Carbohydrates: 45g | Protein: 0.002g | Fat: 0.1g | Polyunsaturated Fat: 0.001g | Sodium: 2mg | Potassium: 3mg | Fiber: 0.004g | Sugar: 45g | Vitamin A: 0.02IU | Vitamin C: 0.02mg | Calcium: 1mg | Iron: 0.02mg
